Thread: Temp Gauge
View Single Post
  #5 (permalink)  
Old 05-30-2017, 09:21 AM
Joe Reeves Joe Reeves is offline
Senior Member
 
Join Date: May 2015
Posts: 490
Default

This is the standard "L" bracket that the bra$$ sensor screws into. The other end of the "L" bracket is normally attached to the head with one of the water jacket bolts. NOTE: Leave a .010 gap between the sensor and the head surface to avoid a false reading.


Last edited by Joe Reeves; 05-30-2017 at 03:08 PM.
Reply With Quote