Evinrude   Evinrude Parts
Evinrude Forum Evinrude Outboard Parts Discussion Forum Evinrude Parts Boat Parts Evinrude Forum Outboard Motor Parts Contact Us
Evinrude Parts
  #1 (permalink)  
Old 10-16-2010, 01:53 PM
Junior Member
Join Date: Oct 2010
Posts: 1
Default 1984 Evinrude VRO wiring

Help, I own a 1984 Evinrude model #E150STLCR XP150 motor. I'm upgrading the original VRO (which has no wires connected to it) to a new JOHNSON/EVINRUDE VRO FUEL / OIL PUMP PART # 5007423 that has a (4)wire harness connected to it. Also purchased a New OMC Evinrude Johnson Cable 174710 or 0174710 that the salesman said I must get to connect the new VRO to the wiring on my motor. My problem is that I don't have a diagram to view that will show me how to connect the OMC Evinrude Johnson Cable 174710 or 0174710 electric wires to my motor wiring harness. On one end of the 174710 cable there's a connector that will plug into the VRO FUEL / OIL PUMP PART # 5007423, but no information or diagrams to show me where to connect the wires at other end of the Cable or harness #174710. Thanks guys
Reply With Quote
  #2 (permalink)  
Old 12-04-2010, 07:41 PM
Junior Member
Join Date: Dec 2010
Posts: 25
Default tony edwards

you should have a new purple wire. it needs to be tied into the harness to any purple wire. all id does, is add 12 volts to the vro pump. all purple wires on engine are the same. so go catch a fish.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 04:36 PM.

Outboard Parts

Other Forums
Yamaha Parts
Mercury Parts
Suzuki Parts
Johnson Parts
Honda Parts

Copyright 2000 - 2017, Outdoor Network LLC