Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

Evinrude 140 runs bad

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Evinrude 140 runs bad

    Hi,
    Quick question. I have an Evinrude 140, 1987. E140TXCUA.
    Engine will not turn more than 4400 rpm. Idles good. After 2500 or so it acts like its dropping 1 or 2 cylinders, sharp like on/off switch. Many new ign parts. No change. Long story short, compression is 118psi on three cylinders and 90 on one cylinder.
    Could the cylinder with low compression cause this type of problem?
Working...
X