Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

1999 200 ficht

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1999 200 ficht

    Hey, Im looking for some insight to a current issue that developed last night. I went to turn the key like I was going to start the motor. Turned key to start, it did its normal system check on the tach but then I realized I didnt hear the recirc pump kick on, then I looked down at the tach and I had 3 flashing lights. The no oil, hot, and check engine light. I just received the boat back from the dealer little over a month ago, he did the update for the motor, new lower unit, new fuel rails, and new fuel filter. Since receiving it back from them, I have cycled the key and all was fine, fuel recirc pump and all kicked on. The only thing I did last night was top off the oil tank which Im guessing has nothing to do with this issue. The battery voltage is right at 12, my garage is constantly above freezing. Any help will be appreciated. Thanks!

  • #2
    Ecu

    I suggest you contact DFI in Orange Beach Alabama. They will service and rebuild the ECU for that engine. I had the same Engine for 10 years and used them twice during that time. They will help you diagnose the problem. You can use your key switch to get the error codes. If you have a service manual it will explain how to retrieve the codes. It definitely sounds like the ECU has failed.

    Comment


    • #3
      I will be tomorrow. Recharged the battery and left the harness off overnight, went out today and it popped right off no problem, no lights. I'm still going to hook up with them to see about being proactive about the next time this happens. Thanks for your input!

      Comment

      Working...
      X