Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

2000 Ficht 90hp starting issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2000 Ficht 90hp starting issues

    Hey all,

    I recently purchased a boat with a 2000 Ficht 90hp motor on it.

    When I try to start the motor it cranks, but wont start. It seems like it is trying to start and a tiny bit of exhaust comes out but it wont actually start. Using a tiny bit of starting fluid (Bad I know) we were able to get it going enough where we could throttle up and it ran perfectly, but then when we throttled back down to idle it died again.

    So far I have tried switching to a smaller fuel tank with fresh fuel, and I'm about to replace the fuel filter, and install new indexed spark plugs.

    I ordered the service manual from Evinrude, but while I wait for it I wanted to see if anyone had experienced similar issues? or had any ideas of things I could try to diagnose the issue.

    Thanks!!!

  • #2
    Check compression to see if all cylinders are even. check fuel pressure.
    Regards
    Boats.net
    Evinrude Outboard Parts

    Comment


    • #3
      2000 90 ficht

      I have a 2005 150 di or ficht started having same problems start it buy spraying mixture of gas and oil instead of starting fluid and do a decarb

      Comment

      Working...
      X